AR15 Two Chamber

Compensador AR15 Two Chamber de Clawgear Premium Military Equipment. Compatible con plataformas AR15-M16 y variaciones en calibre .223 / 5.56 mm. Pieza de acero templado con rosca 1/2 x 28 TPI UNEF. Diseño compatible con los supresores B&T QD (Rotex-III & V). Un compensador que mejora el rendimiento expulsando los gases en una dirección óptima para la reducción de retroceso. La parte superior como la de abajo no presentan orificio evitando distracciones en la línea de vista o levantamiento de polvo y suciedad.

• Allows the operator to enhance the weapon system with B&T QD (Rotex-III & V) suppressors.
• The construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.
• Mount the AR-15 TWO CHAMBER Compensator with the crush washer to ensure the correct alignment on the barrel.
• Closed Bottom Prevents blown up dust and debris.
• Closed Top Prevents distraction in the line of sight.

Compatibility: All AR-15 and M16 variants in .223 or 5.56 mm caliber with a barrel thread of 1/2 x 28
TPI UNEF, for example: Hera Arms The 15th, Schmeisser AR15, DPMS AR-15, etc... Does not fit Oberland Arms OA-15

Installation: Make sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it's snugly. Then use a 19 mm wrench to tighten the compensator until the Clawgear logo faces upwards.