Descripción
G3-G36 SOF. Compensador G3 / G36 SOF de Clawgear. Diseño que distribuye los gases de manera que reduce el retroceso al igual que la elevación (muzzle flip). La base sin orificios evita levantar polvo en posición tumbada. Compatible con supresores B&T QD (Rotex-III & V).
Compatible con: H&K G36 y variaciones, H&K 416 y variaciones, OA-10, H&K G3 y variaciones con rosca M15x1.
B&T Quick Detach
Allows the operator to enhance the weapon system with B&T QD (Rotex-III & V) suppressors.
Breacher Spikes
These sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.
Expansion Chamber
The construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.
Crush Washer
Mount the G3/G36 SOF Compensator with the crush washer to ensure the correct alignment on the barrel.
Closed Bottom
Prevents blown up dust and debris.
Compatibility: H&K G36 and variants, H&K 416 and variants, OA-10, H&K G3 and variants with M15x1 muzzle thread
Installation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.